Peltier Technology Cooled Incubators

Peltier Technology Cooled Incubators

Peltier Technology Cooled Incubators

Rp 000

Memmert Peltier Technology Cooled Incubators Standard Features: 4 model sizes 32, 39, 53 and 108 litres temperature range from +5°C up to +60°C forced ventilation by Peltier fan casing and working chamber of stainless steel material 1.4301 double doors – inner glass door, outside stainless steel door adjustable microprocessor overheat controller (TWW) protection class 3.1 according to DIN 12 880 and additional mechanical temperature limiter serial interface RS 232 incl. MEMMERT-software „Celsius 2000“ parallel printer interface for EPSON ESC/P2-compatible printers chip-card control incl. 1 MEMory CARD XL works calibration certificate for 37°C Control and Heating Concept: Peltier-heating-/cooling system (heat pump principle) integrated in the rear adaptive, fuzzy-supported PID-microprocessor controller temperature setting and LED temperature display with 0,1°C resolution multifunctional programming through 5-digit LED digital display Advantages compared to compressor-type cooled incubators: reduction of energy consumption of up to 90% (!) remarkable temperature distribution being better than +/- 0,3°C (from 10 –37°C) and variation of temperature with time of approx. +/- 0,05°C no refrigerant thus no special arrangements for disposal minimal emission of noise inevitable condensation due to physical reasons does not take place in the working chamber (water droplets) but outside in the cooling unit of the Peltier module High-performance compressor-type cooled incubators are recommended for temperatures below 5°C short cooling-down times for breeding bigger quantities requiring larger working chambers – so far Peltier-technology is not yet economical for this application Technical Data Model Weight (kg) Casing Size w x h x d (mm) Interior Heating Size w x h x d (mm) Vol. (l) Support Shelves/ Supplied Available Available Voltage IPP 200 33 550 x 600 x 490 400 x 320 x 250 32 1/3 115 V, 60Hz 230 V, 60Hz IPP 300 36 630 x 600 x 490 480 x 320 x 250 39 1/3 115 V, 60Hz 230 V, 60Hz IPP 400 53 550 x 680 x 570 400 x 400 x 330 53 2/4 115 V, 60Hz 230 V, 60Hz

Memmert Cooled Incubators ICP compression

Memmert Cooled Incubators ICP compression

Memmert Cooled Incubators ICP compression

Rp 000

Memmert Cooled Incubators ICP compression Tests at temperatures between ambient and 0°C are gaining more and more importance not only in biotechnology, botany or zoology, but also in the pharmaceutical, cosmetic or food industries, in the electronical or optical industries and in many fields of medicine. Key factors for these applications are excellent tempering accuracy and easy-to-handle programming (for example for day / night simulation) as well as optimum reproducibility and documentation of the testing processes Standard features : 5 sizes from 53 up to 749 litres stainless steel 1.4301 temperature range from 0° up to +60°C closed air jacket heating on all sides motorised ventilation in the working chamber adjustable in 10% steps (20%-100%) through controller highly efficient automatic defrosting system microprocessor 3 point controller energy-saving cooling aggregate (CFC-free) multi-functional programming (menu on 5-digit-LED digital display) of a nearly unlimited number of ramps serial interface RS232 incl. MEMMERT-software „Celsius 2000“ or optional RS485 (no extra charge) parallel printer interface for connection of an EPSON-compatible printer (f.ex. LQ400) for documentation according to GLP (Good Laboratory Practice) chip-card control incl. 1 MEMory CARD XL works calibration certificate for one temperature: +37°C ICP Incubator Technical Data Model Weight (kg) Casing Size w x h x d (mm) Interior Heating Size w x h x d (mm) Vol. (l) Support Shelves/ Supplied Available Available Voltage BE 200 31 550 x 600 x 400 400 x 320 x 250 32 1/3 115 V, 60Hz 230 V, 60Hz ICP 400 68 558 x 967 x 486 400 x 400 x 330 53 2/4 115 V, 60Hz 230 V, 60Hz ICP 500 87 718 x 1047 x 556 560 x 480 x 400 108 2/5 115 V, 60Hz 230 V, 60Hz ICP 600 144 958 x 1335 x 656 800 x 640 x 500 256 2/7 115 V, 60Hz 230 V, 60Hz ICP 700 178 1198 x 1495 x 656 1040 x 800 x 500 416 2/9 115 V, 60Hz 230 V, 60Hz ICP 800 227 1198 x 1895 x 756 1040 x 1200 x 600 749 2/14 115 V, 60Hz 230 V, 60Hz Printable Version (View: 2288 | Print: 537)

Vacuum drying ovens VO

Vacuum drying ovens VO

Vacuum drying ovens VO

Rp 000

Memmert Vacuum drying ovens VO The gentle giant in the laboratory With short warming up times, high-precision temperature control and turbo-drying, the vacuum oven VO shows off all its strength – at the same time it can handle heat-sensitive or oxygen-sensitive substances and materials such as cosmetics, food, clocks, books or PCBs and other electronic components with unparalleled gentleness when drying. The direct contact between chamber load and the heatable and removable thermal shelves guarantees in all vacuum oven VO models a quick and even temperature control without loss of heat. Temperature range up to +200 ℃ 3 model sizes (29l, 49l and 1011) of vacuum oven VO State-of-the-art control technology based on the P performance class for all models Anti-splinter; VDE-tested door construction for all models The Exact fit for your application As much function as necessary, as much individuality as possible! In its basic version, the VO vacuum drying oven contains a thermoshelf, USB interface, Celsius software and MEMoryCARD. Customise your oven precisely for your application and pay only for the options that you really need. Optional switching to inert gas: Programmable and digitally controlled inlet for inert gas with a flow rate reduction Optional pump control: Optimised rinsing procedures for pump membranes as needed, as well as signal output for pumps ON/OFF Premium options in the Premium module For elaborate applications a Premium module can be chosen, with its content depending on the model size. Apart from the options of inert gas inlet and pump control, the Premium module also contains one (VO 200) or two (VO 400, VO 500) additional connections for thermoshelves, as well as an extra thermoshelf (only VO 400 and VO 500), a drip tray and the printer port. Considerably shorter heating and processing times in the vacuum oven Each of the maximum up to four aluminium thermoshelves that can be inserted as required is equipped with a separate shelf heating and its own sensors. The separate control circuits react precisely to different loads and humidities, and maintain all the levels used equally to the setpoint temperature. Because of the direct contact between heating and chamber load, the heating and operating times in the vacuum drying oven VO are reduced by some 75 per cent compared to a conventional drying oven. To achieve an optimum temperature distribution on all separately heated levels in the chamber, the thermoshelves for our vacuum drying oven are made of anodised and surface-enhanced aluminium as standard. For applications with highly corrosive materials we optionally recommend that you choose stainless steel thermoshelves from our accessories list, because of their resistance to chemicals. Your advantages with aluminium thermoshelves in the vacuum drying oven at a glance Greater usable surface Optimised temperature distribution With no extra charge for standard delivery Optional: thermoshelves made of stainless steel can be chosen at no extra charge Stainless steel - a vacuum oven (almost) for ever 60 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each vacuum oven: The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective production Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class) Two-year guarantee for appliances sold outside Germany The temperature values of all sterilisers are measured according to DIN 12880:2007-05

Hot air steriliser S Memmert

Hot air steriliser S Memmert

Hot air steriliser S Memmert

Rp 000

Hot air steriliser S Memmert Our steriliser S complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. The validation of a Memmert hot air steriliser is possible anytime, as our exemplary process validation by an independent, accredited test institute shows. In combination with the user-ID card, the process-controlled, electromagnetic door lock is the icing on the cake in terms of safety in the laboratory. Temperature range up to +220°C (Basic) or +250 °C 9 model sizes (14l to 749l) 3 performance classes Basic/Excellent/Perfect Natural convection or forced air circulation N/F Intelligent functions for safe sterilisation with hot air Disinfection of appliances and instruments is not sufficient in medicine and research. Only sterilisation provides sufficient protection. In the steriliser of the Excellent and Perfect class, the setpoint wait function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable Pt100 temperature sensors.In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser S is absolutely ideal. Stainless steel - a sterilisr (almost) for ever 60 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each of our appliances: The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective production Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class) Two-year guarantee for appliances sold outside Germany The temperature values of all sterilisers are measured according to DIN 12880:2007-05

Memmert Oil Bath One

Memmert Oil Bath One

Memmert Oil Bath One

Rp 000

Memmert Oil Bath One Oil Bath One Heating bath with the medium oil The high temperatures in the oilbath demand a finely-tuned temperature control as well as multiple overtemperature protection. Apart from the electronic overtemperature controller, a wide range of visual and acoustic signals (for example if the filling level is too low, for overtemperature, but also for input acknowledgement or to signalise the end of the programme) ensure smooth-running test procedures in the laboratory. Temperature range up to +200 ℃ 6 model sizes (7l to 45l) An extensive range of optional accessories is available: e.g. flat and gable lids, floor grid State-of-the-art control technology of the Excellent performance class for all models Heating concept with dual benefits The superior heating concept of the Memmert ovens can also be found in the heating bath. Protected from water, but still close to the load, the heating lies under deep-drawn and easy to clean ribs. The heating elements can therefore neither corrode nor become furred. Through their positioning in the floor and side walls, a natural mixing of the medium arises, providing better temperature distribution in the bath. Stainless steel – an oilbath (almost) for ever 60 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each of our appliances: The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective production Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class) Two-year guarantee for appliances sold outside Germany

Memert Incubator Incubator

Memert Incubator Incubator

Memert Incubator Incubator

Rp 000

Memert Incubator INB / INE / INP / IFE / IFP In the laboratory, our incubator is ideal for all applications with temperatures up to +70°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully. Temperature range up to +70 °C 8 model sizes (32l to 749l) 3 performance classes Basic/Excellent/Perfect Natural convection or forced air circulation N/F Double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature Sterilisation of chamber via STERICard (P class) Memmert incubator - A gentle force in the laboratory So that we can ensure optimum air circulation in the incubator chamber even when it is fully loaded, we have equipped our controller classes Excellent and Perfect with an adjustable air fan. Since our unique all-round surface heating is optimally geared to both natural convection and forced air circulation, the fan can be switched off entirely for sensitive samples and for samples which may not be exposed to air turbulence. Specific use in accordance with the German MPG (Law on Medical Devices) In accordance with the German Law on Medical Products (Directive 93/42/EEC), the incubators INP can be used for the warming of irrigation solutions and infusions. Stainless steel – an incubator (almost) for ever 60 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each of our incubators: The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective production Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class) Two-year guarantee for appliances sold outside Germany The temperature values of all incubators are measured according to DIN 12880:2007-05 With the help of our model selection, with dimensioned model sketches and extensive technical data for download, you can find the right incubator for your needs. The flexibility and technical features of our appliances meet all possible needs. Put us to the test! From 32 models, expandable with convenient , approved and tested accessories, you will easily find the incubator ideally suited to your needs. The three controller classes Basic, Excellent and Perfect cover all requirements of thermal safety, precision and quality assurance, building upon each other.

CO2 Incubator INCO

CO2 Incubator INCO

CO2 Incubator INCO

Rp 000

CO2 Incubator INCO The INCO CO2 Incubator Cell cultures, tissue cultures and bacteria cultures, as well as micro-organisms, need protection in a controlled and physiologically ideal environment. Alarm functions, three-fold overtemperature protection and simultaneous display of all parameters provide safety for samples and cultures in medicine, life science, environmental technology, bacteriology, virology, biology, biotechnology and zoology. Temperature range up to +50 ℃ 3 model sizes (108l, 153l and 246l) The standard INCO appliance can be expanded with 7additional modules State-of-the-art control technology based on the P performance class for all models Humidity limit control integrated as standard for all models (humidity module with active humidity control system at extra charge) For all models, the inner chamber, including all fittings and all sensors, can be sterilised at 160°C in a 4 hour programme, using the standard STERICard Lean perfection - top precision ! We never save on essentials. Even in the attractively-priced standard model, the CO2 incubator INCO offers unparalleled precision and reliability. Do you have any further requirements in addition to this? You can put together your own customised INCO from 7 optional and freely combinable additional modules. Comfort module: Two gas connections with quick release connectors, automatic switch-over between gas bottles (a combination of the comfort module and the O2 module is not possible, since N2 introduction takes place via the second gas bottle connection) Hygiene module: electropolished, seamless laser-welded chamber Communication module: USB interface, “Celsius” standard software for programming and logging, ring memory, printer port CO2 module: Extended CO2 range from 0 to 20% O2 module: Control of oxygen concentration through the introduction of nitrogen, setting range from 1% to 20% O2(a combination of the comfort module and the O2 module not possible, since the N2 introduction takes place via the second gas bottle connection) Premium module: Includes comfort, hygiene, communication and CO2 modules Humidity module: active microprocessor humidification and dehumidification control (40-97% rh) Uniform temperature distribution: Interior heated on all 6 sides: For the INCO, the tried and tested Memmert heating concept was once again perfected: heating the inner chamber from all six sides, along with the electronic humidity limit control, is decisive in preventing condensation from forming in the inner chamber, while offering maximum protection to your cell cultures. An aluminium thermal conductive layer supports optimum temperature distribution, and serves as a heat accumulator in case of a temporary power failure. The turbulence-free chamber ventilation ensures a constant and uniform atmosphere. Stainless steel - a CO2 incubator (almost) for ever 60 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each of our appliances: The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective production Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class) Two-year guarantee for appliances sold outside Germany The temperature values of all CO2 incubators are measured according to DIN 12880:2007-05