Sew 180 CB - Standard Electric Works

Sew 180 CB - Standard Electric Works

Sew 180 CB - Standard Electric Works

Rp 000

Sew 180 CB - Standard Electric Works AMPLIFIER PROBE ( 180 CB-A) The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation Working with Tone Generator to identify wires Volume control to increase sensitivity and customized as per the working enviornment Hidden ON / OFF to prevent battery drain Power supply is from any 9V battery with a life of approximately 100 hours A plug container designed for head set or hand set AMPLIFIER PROBE ( 180 CB-G) Tone Generator is a great tool for finding and identifying cable pairs or individual conductors Besides providing tone generator, tone generator serves as a continuity and polarity tester The result of the test is shown by the three color led Complies with IEC / EN 61010-1, IEC / EN 61019-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3 SPECIFICATIONS TONE GENERATOR Square Wave Waveforms Frequeny 1.13KHz + / - 15% 9V amplitude P-P Over Voltage Protection 100V DC Single tone yes Alternating Tone yes AMPLIFIER PROBE Frequency Detection of 1Hz - 12KHz Receiver Distance 50-60 mm Sensitivity Control yes Connection RJ11 connector GENERAL Operating Temperature & Humidity 0 degrees C ~ 40 degrees C, 80% Max Storage Temperature & Humidity -10 degrees C ~ 50 degrees C, 80% Max Amplifier Probe Resources: 9V battery, Tone Generator: 9V battery Probe Amplifer Dimensions: 270 ( L) x 50 ( W) x 25 ( H) mm, Tone Generator: 62 ( L) x 58 ( W) x 34 ( H) mm Amplifer Probe Weight: 125g ( including battery) , Tone Generator: 120g ( including battery) Safety Standard IEC / EN 61010-1, IEC / EN 61010-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3

Lutron LAN-922 general - Instrument

Lutron LAN-922 general - Instrument

Lutron LAN-922 general - Instrument

Rp 000

Lutron LAN-922 general - Instrument LUTRON LAN-922 NETWORK CABLE TESTER SPECIFICATION: Main unit Display 8 pairs LEDs for the monitors wires. Connector RJ-45/ KEY x 2, RJ-11/ DEC x 2. ( 30 micro gold plating ) Power DC 9V battery, Alkaline type, 006P, MN1604 ( PP3) or equivalent. Dimensions 101 x 81 x 25 mm. Weight 125 g. Housing High impact ABS plastic. Interface Ethernet 10 BASE-T, EIA/ TIA-568A, EIA/ TIA-568B, AT& T 258A, TOKEN RING, USOC8/ 6/ 4, DEC JMM.

Fluke a3001 FC Wireless iFlex AC Current Module

Fluke a3001 FC Wireless iFlex AC Current Module

Fluke a3001 FC Wireless iFlex AC Current Module

Rp 000

Fluke a3001 FC Wireless iFlex AC Current Module Specifications Range 0.5 A to 2500 A AC Resolution 0.1 A Accuracy 3 % ± 5 digits (5 Hz to 500 Hz) Crest factor (50 Hz/60 Hz) 3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, add 2 % for C.F. > 2 LCD w/backlight 3½ digits Log rate/interval 1 sec minimum/adjustable by PC or front panel Battery type 2 AA, NEDA 15 A, IEC LR6 Battery life 400 hours Memory Record up to 65,000 readings RF communications 2.4 GHZ ISM Band RF communication range Open air, unobstructed: Up to 20 m Obstructed, sheetrock wall: Up to 6.5 m Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m Operating temperature -10 °C to +50 °C Storage temperature -40 °C to +60 °C Temperature coefficient Add 0.1 X (specified accuracy)/ °C (<18 °C or >28 °C) Operating humidity 90 % at 35 °C, 75 % at 40 °C, 45 % at 50 °C Altitude Operating: 2,000 m Storage: 12,000 m EMC EN 61326-1:2006 Safety compliance IEC 61010-1, 600 V CAT IV/1000 V CAT III, 3rd edition Safety rating CAT IV 600 V, CAT III 1000 V Certifications CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE Ingress Protection (IP) rating IP42 Pollution degree 2 Jaw opening 25.4 cm (10 in) coil Size (HxWxD) 16.5 cm x 6.35 cm x 1.4 cm (6.5 in x 2.5 in x 1.4 in) Weight .22 kg (8 oz)

SEW 185 LCT Local network cabling testers

SEW 185 LCT Local network cabling testers

SEW 185 LCT Local network cabling testers

Rp 000

SEW 185 LCT Local network cabling testers FEATURES Designed for RJ45 / RJ11 modular cables, 10/100 base-T cable and Token Ring cables. The LAN cable tester can verify cable continuity, open, short circuit and miss-wired. Remote receiver units available for cable installed far either on wall plate or patch panel. Auto and manual scan function. Test the ground wire. Function key status. Sound warning bell wire status. Display: LED status indication wire. SPECIFICATIONS Display: LED Operating temperature: 0 ° C ~ 40 ° C Dimensions: Unit Teacher 132 (L) × 55 (W) × 39 (D) mm Far receiving unit 74 (L) × 30 (W) x 25 (D) mm Weight: Master Unit: 148 g Far receiver unit: 33g Power source: 9V (6F22) × 1 Safety standards: EN 61326-1