Sew 180 CB - Standard Electric Works
Sew 180 CB - Standard Electric Works
AMPLIFIER PROBE ( 180 CB-A)
The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation
Working with Tone Generator to identify wires
Volume control to increase sensitivity and customized as per the working enviornment
Hidden ON / OFF to prevent battery drain
Power supply is from any 9V battery with a life of approximately 100 hours
A plug container designed for head set or hand set
AMPLIFIER PROBE ( 180 CB-G)
Tone Generator is a great tool for finding and identifying cable pairs or individual conductors
Besides providing tone generator, tone generator serves as a continuity and polarity tester
The result of the test is shown by the three color led
Complies with IEC / EN 61010-1, IEC / EN 61019-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3
SPECIFICATIONS
TONE GENERATOR
Square Wave Waveforms
Frequeny 1.13KHz + / - 15%
9V amplitude P-P
Over Voltage Protection 100V DC
Single tone yes
Alternating Tone yes
AMPLIFIER PROBE
Frequency Detection of 1Hz - 12KHz
Receiver Distance 50-60 mm
Sensitivity Control yes
Connection RJ11 connector
GENERAL
Operating Temperature & Humidity 0 degrees C ~ 40 degrees C, 80% Max
Storage Temperature & Humidity -10 degrees C ~ 50 degrees C, 80% Max
Amplifier Probe Resources: 9V battery, Tone Generator: 9V battery
Probe Amplifer Dimensions: 270 ( L) x 50 ( W) x 25 ( H) mm, Tone Generator: 62 ( L) x 58 ( W) x 34 ( H) mm
Amplifer Probe Weight: 125g ( including battery) , Tone Generator: 120g ( including battery)
Safety Standard IEC / EN 61010-1, IEC / EN 61010-031, EN61326-1, EN55011, EN61000-4-2, EN61000-4-3
Posting Komentar