Shaw Moisture Meters SDT
Rp 000
Shaw Moisture Meters SDT
The Shaw Moisture Meters Model SDT is a compact, 2 wire, 4-20 mA dewpoint transmitter designed to meet the demands of tough industrial applications. The unit is fully self contained within a robust 316 grade stainless steel casing providing weatherproof protection to IP66 / NEMA4.
Utilising the industry standard, Ultra High Capacitance Shaw Moisture Sensor, various dewpoint ranges are available covering an overall range from -120�C to +20�C Dewpoint. The 4-20 mA output is configurable in �C Dewpoint, �F Dewpoint, ppm(v), g/m3 and lbs/MMSCF.
Weighing in at only 175g, the Model SDT is light enough to be supported by its� connection direct into the pipeline or can be placed in a dedicated sample cell.
Incorporating advanced electronics, the Model SDT can derive its power from 7-28V dc non-isolated power source and is configured to output a linear, isolated, 4-20 mA signal for distances up to 1000 meters.
(For full details please request specification sheet Model SDT)
Features
2 Wire, 24V, 4-20mA Dewpoint Transmitter
Various Ranges: Overall Range -100�C to +20�C Dewpoint
Output configurable in �C Dewpoint, �F Dewpoint, ppm(v), g/m3 and lbs/MMSCF
Accuracy �2�C Dewpoint
Weatherproof Rating IP66 � NEMA4
Maximum Cable Length 1000m
Open/Short Circuit Detection
Supplied with Calibration Certificate Traceable to National & International Humidity Standards
Linear 4-20 mA output signal
Weighs only 175 g
Self contained, robust and reliable
Posting Komentar