Honeywell Digital Controller UDC-1700
Rp 000
Honeywell Digital Controller UDC-1700
Item Code: UDC1700
Honeywell Universal Digital Controller UDC1700 is obtainable with a succeeding input that accepts either a linear or potentiometer input signal as a remote set point. The UDC1700 controller is accessed by a dual set point option with easy maintenance. These are distributed at a reasonable price in the market after they are tested by our expert groups. The current set point is selected by a digital input which provides bumpless transfer. These digital controllers contain automatic timing features which are accessed with suitable requirements of clients.
Features :
NEMA 3/IP65 – The UDC1700 controller faceplate is rated NEMA 3/IP65 for protection against windblown dust, rain, snow and sleet
Remote Setpoint Model – The UDC1700 controller is available with a second input that accepts either a linear or potentiometer input signal as a remote setpoint
Dual Display – The UDC1700 has two four-digit displays with seven LED segments, each configurable for PV and SP (non-adjustable), PV and SP (adjustable), PV and Ramping SP and PV only
PC Software Support – The UDC1700 controller is supported with PC software allowing you to quickly configure your device from your PC
High Accuracy (0.1%) Universal Inputs – The UDC1700 controllers accepts seven different types of thermocouples, RTDs, current and voltage linear inputs. All inputs are configurable as standard
Up to Three Outputs – The UDC1700 controller provides up to three output types (relay, SSR and linear) for time and current proportioning, duplex mode (heat/cool), PV or SP retransmission and alarms
Manual/Automatic Mode – The UDC1700 provides bumpless transfer. In the manual mode the operator can directly control the output through the two front face keys (upper and lower keys). The output value is monitored on the lower display
Control Algorithms – Four control algorithms can be set up through the configuration menu: On/Off, PID, PD+MR and TPSC. The TPSC (Three Position Step Control) control algorithm is dedicated to control valve positioning without slidewire feedback from the motor shaft
Dual Set point – The UDC1700 controller is available with a dual set point option. The current set point is selected by a digital input
Communication – The UDC1700 controller is available with an optional RS-485 communication interface. It provides a link for up to 32 units and a host computer through ASCII or Modbus RTU protocol at up to 19200 baud
Posting Komentar